Suhner 1 kW Router 3,500 - 30,000 rpm
Previous image
Suhner 1 kW Router 3,500 - 30,000 rpm
Next image
Zoom image

Suhner 1 kW Router 3,500 - 30,000 rpm

Ask a question (2)

SUHNER UAD 30-RF - Industrial quality milling and grinding router motor

Due to the large-sized double ball bearings in a stable, thick-walled steel motor flange, and the generously dimensioned fan, this unit comfortably meets its challenges without overheating. This SUHNER milling motor is ideal for working with plastics, foams, woods, compsites and metals. It is also extremely quiet (at 9000 rev / min only 72dB).

Product specifications industry milling motor SUHNER UAD 30-RF:

Powerful milling motor with 1050 watts input and 740 watts output power
High torque of 0,32 Nm for operations in e.g. hard wood, steel or brass
Tachometer regulator electronics for constant performance and rotation speed of the milling motor
Soft start and starting current limiter
PTC thermal monitoring
Very high torque even at 3500 RPM.
Hard-faced motor winding for dust and particle protection
Steel motor flange with double bearing for high milling forces
Electronic overload protection prevents overheating of the milling motor
Shutoff carbon brushes for motor protection
Suitable to drive flexible shafts
FastChange: carbon exchange in 5 minutes, thanks the sophisticated motor construction and housing

Technical data / scope of delivery:

Power input 1050 watts / rated current at 5,0 A with high output power of 740 watts
Idle speed from 3,500 to 30,000 RPM.
Collet 8 mm
Open-end wrench set SW18 and SW22 mm
Collar-Ø 43 mm
Maximum collet diameter: 10mm
Weight: 2,85 kg
Only 72 dB at 9.000 RPM

 

  • £275.00
  • exc VAT
Qty:  

Product questions

  • Jamie Stewart
    23-04-2021, 10:40

    Forget the last question, what I really meant to ask is will it safely take an ER20?

    Administrator
    26-04-2021, 09:52

    The Suhner 1kW and 1.5kW routers use the same collets. These are offered inn sizes up to 10mm. They are not ER20 compatible.

  • Edward O'Clery
    08-06-2020, 10:44

    Is the Suhner UAD 30-RF an exact replacement to the Kress 1050 FME-1

    Administrator
    09-06-2020, 10:34

    The Suhner Router has the same 43mm diameter collar as the Kress, so fits in same holder and can be considered a direct replacement. The Suhner has slightly better performance in terms of stronger bearings, better power output, and a wider RPM range. Note however that the two routers use different collets/nuts.

Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
Checkout